Autel IM608 Couldn’t Update Solution

 

I couldn’t update my Autel IM608. I pressed the refresh button and it jumped to the refresh screen. Update function like this for an hour? server problems? Have good Wi-Fi connections! Any suggestions?


Solution:

This started happening after the last system update.

Update: working now, after a restart and Wi-Fi on/off

After the tablet reset, it now works.

For those who have the same problem. Force close the device and start again. All good.

评论

发表评论

此博客中的热门博文

Autel MaxiIM IM608 Program VVDI Key for Benz W221

图片
  Problem : Can Autel MaxiIM IM608 program VVDI keyless key for MB S class w221? Programmed it, but key works only as standard,key keyless not working. Advice: -Yes but needs to be type 08 key ONLY or will not work Also, this is 2 step process: 1st program regular key. Then synchronize the prox function The key that you have is not proximity key. Proximity key will read as type 08 and also has 2 antennas on it -Under 2009 Proxy have different frequency, not covered it by VVDI, you need original NEC Proxy key. Do you program key like V41 type? If not, keyless entry doesn’t work. – Proximity by VVDI MB or CG MB will be OK. -Original key and 2 batteries can’t be used. Before that, the device is reading the cup supported by vvdi.. I made it for a 2011 s350 it says w221 on the license but the device read w216. Keyless not active because of w216.
阅读全文

Autel MaxiIM IM608 released new software update for Toyota

图片
  Autel MaxiIM IM608 released new software update for Toyota Toyota: Adds Add Smart Key, Erase Smart Key, PEPS Reset, Back up IMMO Data and Generate Analog Key functions for 4A smart key-equipped models of 2021 below: Corolla (fuel/HV), Corolla Touring (fuel/HV), Corolla Sport (fuel/HV), Corolla Cross (fuel/HV) and Levin (fuel/HV). [First released password-free functions] use with Autel APB112 smart key emulator and G-box2 to read data from the immobilizer, eliminating the need for a password to add a 4A smart key.
阅读全文